Posts

Comments

Payouts

• gogreenbuddy (67)in #diy • 5 days ago

  Making wooden candle holders to make my hobby not so costly..

  Making a bunch of candle holders

  $8.73

  • Pending payout amount: $8.73
  • Breakdown: 4.37 HBD, 13.44 HP
  • Payout in 2 days

   72 12
• gogreenbuddy (67)in #life • last month

  Build series #3 Flattenening my future lawn

  This is a bit a shorter video as I'm just digging and dumping dirt all of my garden in low spots!

  $23.77

  • Past Payouts $23.77
  • - Author $11.89
  • - Curators $11.88

   73 56
• gogreenbuddy (67)in #life • 2 months ago

  I had to give up on my gabion fencing too much work!

  I worked for 2 years now on my fence and really almost all the free time i had! The last 80 meters i decided its going to be normal fencing quick & easy... Time started to be an…

  $16.94

  • Past Payouts $16.94
  • - Author $8.47
  • - Curators $8.46

   60 10
• gogreenbuddy (67)in #life • 2 months ago

  It was time for a massive gopro stand

  I got tired of the fragile gopro stands/mounts/tripods. I decided to built them myself all with a magnetic base. Way better and no vibration problems. Enjoy the watch :)

  $13.60

  • Past Payouts $13.60
  • - Author $6.80
  • - Curators $6.80

   43 15
• gogreenbuddy (67)in #diy • 3 months ago

  Upgrading the hydraulics of the Massey Ferguson to use my carry all

  This video took me months to make and over 200gb of film material where i had to throw away lots of video because i made mistakes or it became confusing to watch :D My goal was…

  $4.99

  • Past Payouts $4.99
  • - Author $2.50
  • - Curators $2.49

   37 8
• gogreenbuddy (67)in #homesteading • 3 months ago

  Chainsaw milling a Tree

  It was time again to start ´building´ the new house. It still winter but i could clean up the area more. Some trees were in the way and making firewood out of it would be a shame…

  $13.71

  • Past Payouts $13.71
  • - Author $6.86
  • - Curators $6.85

   65 17
• gogreenbuddy (67)in #homesteading • 5 months ago

  Sort of made a bench!

  Making a bench sort of

  $16.45

  • Past Payouts $16.45
  • - Author $8.23
  • - Curators $8.22

   89 12
• gogreenbuddy (67)in #life • 6 months ago

  Moving Dirt harder than it looks!

  I was busy again! The last month i built a huge section of the fence and now it was time to backfill. Days I've been driving back and forth to haul dirt to hard to get places…

  $11.54

  • Past Payouts $11.54
  • - Author $5.77
  • - Curators $5.76

   73 6
• gogreenbuddy (67)in #homesteading • 7 months ago

  Dick'in around to repair a Yato Wrench

  Hi guys, Made another video trying to fix a Yato Wrench. Financially not worth it but i hate to throw away stuff because small things break. We need to repair more things to keep a healthy world.

  $7.15

  • Past Payouts $7.15
  • - Author $3.58
  • - Curators $3.57

   33 23
• gogreenbuddy (67)in #homesteading • 8 months ago

  Tricky gate install

  Iḿ back again with another video my last gate the main gate for the property. I can almost start building the actual house can´t wait!. The gate: 4.5meters wide so i can…

  $12.65

  • Past Payouts $12.65
  • - Author $6.33
  • - Curators $6.32

   48 13
• gogreenbuddy (67)in #life • 9 months ago

  Building house #2 Some updates & rebar bending

  It was time again for a video the last one was a month ago! I hit into some trouble with a mountain of underground trash without any gold coins unfortunately! Finally done…

  $12.37

  • Past Payouts $12.37
  • - Author $6.19
  • - Curators $6.18

   53 16
• gogreenbuddy (67)in #life • 10 months ago

  Building House #1 digging for foundation with a front end loader.

  Digging with a tractor

  $11.56

  • Past Payouts $11.56
  • - Author $5.79
  • - Curators $5.78

   57 13
• gogreenbuddy (67)in #life • 11 months ago

  Tree removal next to powerline!

  Tree Removal it stays a risky business...

  $5.97

  • Past Payouts $5.97
  • - Author $2.99
  • - Curators $2.98

   43 8
• gogreenbuddy (67)in #life • 11 months ago

  Welding the main gate!

  Hi guys, Ive been building again, this time the last gate I need for the main house! Material I used: -80x40x2mm 2 meter lengths and 1.5meter lengths -Phosphoric acid…

  $13.46

  • Past Payouts $13.46
  • - Author $6.73
  • - Curators $6.73

   37 11
• gogreenbuddy (67)in #homesteading • 11 months ago

  Building a cheap carry all

  Building a tractor attachment

  $30.37

  • Past Payouts $30.37
  • - Author $15.25
  • - Curators $15.12

   684 8
• gogreenbuddy (67)in #diy • last year

  Pushing stuff Pulling stuff Loading stuff

  Fun with the tractor!

  $5.04

  • Past Payouts $5.04
  • - Author $2.56
  • - Curators $2.48

   368 14
• gogreenbuddy (67)in #homesteading • last year

  Making a cheap dust collection system

  Hi all, I made another video this time about improving my dust collection. I got nuts of the dust in my workplace and i don't like to always wear a dust mask... So i attached…

  $107.71

  • Past Payouts $107.71
  • - Author $53.95
  • - Curators $53.75

   965 20
• gogreenbuddy (67)in #diy • last year

  Mzking a workbench out of beetle killed pine

  I like to make videos and this time i made a workbench from very punky pine. Enjoy the watch

  $13.35

  • Past Payouts $13.35
  • - Author $6.78
  • - Curators $6.57

   1003 8
• gogreenbuddy (67)in #diy • last year

  Converting a concrete mixer

  Ive made another video this time its about upgrading a concrete mixer. I got really tired of the belt slipping and thus i decided to improve it. Enjoy the watch!

  $1.19

  • Past Payouts $1.19
  • - Author $0.60
  • - Curators $0.59

   21 1
• gogreenbuddy (67)in #diy • last year

  Sharpening a firewood tablesaw to mill lumber

  Free Lumber from firewood logs

  $0.98

  • Past Payouts $0.98
  • - Author $0.49
  • - Curators $0.49

   34 2