Hello Hivers and my dearest friends in DIYHub welcome to my blog.

I made an earring from Safety Pin and I can't wait to show you the tutorial.
These pins have been in my purse. I kept them there for future use, now it's here, the need has come. I needed a big earring when I suddenly came up with an idea💡. When I dismantle the pin and found out that the pin won't give me the length I desired but I still made it and I gave it to my daughter.

Here's the Tutorial

Material Required

Safety Pin
Pearl Bead 4mm
Cooper wire
Plier

Steps

First loose the pin, this might be very tricky but you have to be very careful so as not to injure yourself. Then you will insert the beads (mine was 13 in number). Then bend the 2 ends of the pins to form hoops.

Next you have to bend the copper wire; form a hook at one end and a hoop at the other end.

This is the result👇