Altona Test-net Validator using Raspberry Pi4B 8 GB

A Step by step manual to setup a Raspberry Pi for running a validator on the Altona Test-Net.

Screenshot 2020-07-02 at 12.19.14.png

Required Hardware:

Raspberry Pi B 8GB RAM
Raspberry Pi Power Supply 3A USB-C
MicroSD card (16GB)
Case with heatsink and ventilator (e.g. Joy-it)
External SSD (1TB) with USB 3
USB Keyboard
HDMI Kabel(mini to full)
TV / Monitor with HMDI input
Ethernet cable

Required Software:

Ubuntu Server 20.04 for Raspberry Pi See here
Balena Etcher See here
Rust See here
Go See here
Lighthouse See here

Flash Ubuntu Server to microSD card

Put microSD into the SD Card adapter and plug it into your PC / Mac.
Download Ubuntu Server for Raspberry Pi and save the image on you Desktop.
On Mac open the Etcher App, select the image and flash it to the microSD card.
Put the microSD card into the Raspberry Pi.

Assemble Raspberry Pi Case

Follow the instructions of the case you bought and assemble it.
I can recommend the Joy-it case with two ventilators. Very easy and fast to open / close because it uses magnets.

Connectivity check before first Power up of the Raspberry Pi

External SSD drive connected to Blue USB 3 Port.
Usb Keyboard connected.
Ethernet cable connected to Router.
HDMI cable connected to Monitor / TV
Lastly connect power supply into socket.

How to get the IP / hostname to connect remotely

If the MicroSD card has been flashed correctly you should see a terminal screen after 1-2 minutes which says:

Username: ubuntu
Enter Password:

Type in ubuntu for username and password. You are going to create a new user for the main tasks and disable ubuntu user to access via SSH.

Now you want to know what the IP address is for the Raspberry Pi so you can connect to it from another PC / Laptop remotely.

In order to find the IP address (e.g. 192.168.x.x) type the following into the terminal.

hostname -I

Write down the IP address, you will need it when logging into the Raspberry Pi from a different computer.

Connect to the Raspberry Pi remotely vis SSH and update the system

On your PC / Laptop open either the terminal (mac) or a SSH App for windows and do the following.

First type ssh ubuntu@YOUR IP (e.g. ssh ubuntu@192.168.2.123) to connect to your Raspberry Pi.
Next update your system with the following command sudo apt-get update && sudo apt-get upgrade

Create a new user and update SSH and firewall rules for security (Optional)

Create a new user for connecting to the Raspberry Pi going forward which is saver then using the ubuntu account.

Type sudo adduser YOUR-USERNAME
Next give the new user sudo rights by adding the user to the sudo group. Type sudo usermod -G sudo YOUR-USERNAME
Switch from the current (ubuntu) user to the user just created by typing su YOUR-USERNAME

Next update the firewall rules to restrict traffic to the server.

Allow connection via port 22 which is SSH.
sudo ufw allow 22/tcp

Allow connection via port 3000 which is used by Grafana.
sudo ufw allow 3000/tcp
Allow connection to port 30303 udp and tcp for Geth (Ethereum Blockchain)
sudo ufw allow 30303/tcp
sudo ufw allow 30303/udp
Enable the firewall with ufw enable. To check the status type ufw status

Finally restrict the root account to login via SSH.

Type sudo vi etc/ssh/sshd_config and change the line PermitRootLogin yes to PermitRootLogin no

Mount the External SSD USB3 drive

Be sure the External SSD USB3 drive is plugged into the Raspberry Pi blue USB port.

To find the drive type the following sudo fdisk -l In my case the external drive is the last one shown in the list ==/dev/sda==.

Next format the disk and create a portion using the following command sudo mkfs.ext4 /dev/sda

Manually mount the disk to the folder mnt/ssd.

First create a directory mnt/ssd by typing sudo mkdir /mnt/ssd
Next grant your user account permission to access the directory sudo chown -R YOUR-USERNAME:YOUR-USERNAME /mnt/ssd/
Mount the disk to the created directory sudo mount /dev/sda /mnt/ssd

You need the unique ID of the External disk in order to mount the drive automatically. Type sudo blkid

Find the line with your disk (starting with /dev/sda in my case) and copy the number after UUID (e.g. 5c3a8481-682c-4834-9814-17dba166f591)

Edit the ==/etc/fstab== file to auto mount your disk on startup. Type sudo vi /etc/fstab and add the following line at the end UUID=YOUR-NUMBER /mnt/ssd ext4 defaults 0 0

Now reboot your system with sudo reboot. Connected again via SSH and check if you see the drive with the following command df -ha /dev/sda

Install Rust

To build the Lighthouse Client from Source you need to install Rust on your Raspberry Pi.

To install Rust type curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh
When prompted, enter 1 for the default installation.
After finished type the following to add Rust to your System path source $HOME/.cargo/env
Now you need to source the user by typing source ~/.profile
Finally install some dependencies Rust will need by typing sudo apt install -y git gcc g++ make cmake pkg-config libssl-dev

Install the Lighthouse Client

Now with Rust and all dependencies installed you can get the Lighthouse repository.

Type git clone https://github.com/sigp/lighthouse.git
Change into the Lighthouse directory with cd lighthouse
Build Lighthouse by typing make

This will take up to an hour. If the installation was successful you should be able to run the lighthouse --help command.

Move the Lighthouse executable file to the usr/local/bin folder with sudo mv ~/lighthouse/target/release/lighthouse /usr/local/bin

Install GO

In order to use the Lighthouse client you need to run the Ethereum blockchain. I use the Geth client in this Tutorial.

To do this you need to install Go first.

-Create and change into a download folder by typing mkdir ~/download && cd ~/download

Install the latest GO ARM version. As of 1st July 2020 it is sudo wget https://dl.google.com/go/go1.14.4.linux-arm64.tar.gz.
You can check latest version on gaoling.org
Extract the file to the local folder so it can be executed by typing sudo tar -C /usr/local -xvf go1.14.4.linux-arm64.tar.gz
Change owner to root, and change permissions sudo chown root:root /usr/local/go and sudo chmod 755 /usr/local/go
Set environment variables by editing the /etc/profile file and add the bold line at the end: sudo vi /etc/profile export PATH=$PATH:/usr/local/go/bin
Finally reboot with sudo reboot and try if all works well with go version

Install Geth (Ethereum blockchain)

Download Geth from Github with git clone https://github.com/ethereum/go-ethereum.git
Change into the go-ethereum folder with cd go-ethereum and type make to build Geth.
Move the Geth executable file into the usr/local/bin folder with sudo mv ~/go-ethereum/build/bin/geth /usr/local/bin
Try if everything worked with geth version

Start Geth using a Service to keep process running in the background

In order to keep Geth running after you closed a window or SSH session you will need to create a Service (systemd). See this great tutorial for more info

Create an empty "geth.service" file in etc/systemd/system by typing
sudo vi /etc/systemd/system/geth.service
Press i to edit and copy paste the following:

[Unit]
Description=Geth Node
After=network.target
Wants=network.target
[Service]
WorkingDirectory=/home/tarek
ExecStart=/usr/local/bin/geth --goerli --rpc --cache 512 --port 30303 --datadir /mnt/ssd/ethereum
User=ethereum
Group=ethereum
Restart=always
RestartSec=5s

[Install]
WantedBy=multi-user.target
Alias=geth.service

This basically says: "Use the user with name and group ethereum,run the Geth client as a service in fast sync mode and save the data to my external SSD drive"
More details about Geth parameters can be found here
Now you need to create a user called ethereum (or any other name you like. The reason you want to create a different user is because it is recommended that a Service user shouldn't be able to login to the server via SSH.
To create a service user (I called it ethereum) and type the following.
sudo useradd --no-create-home --shell /bin/false ethereum
Next create a folder on the SSD drive for the Geth data to be stored. Type sudo mkdir -p /mnt/ssd/ethereum
Give the new user access to write data on the SSD with sudo chown -R ethereum:ethereum /mnt/ssd/ethereum
Finally reload and start the service by typing sudo systemctl daemon-reload followed by sudo systemctl start geth

Start Beacon-Chain using a Service to keep process running in the background

In order to keep beacon-chain running after you closed a window or SSH session you will need to create a Service (systemd). See this great tutorial for more info

Create an empty "beacon.service" file in etc/systemd/system by typing
sudo vi /etc/systemd/system/beacon.service
Press i to edit and copy paste the following:

[Unit]
Description=beacon-chain
After=network.target
Wants=network.target
[Service]
WorkingDirectory=/home/tarek
ExecStart=/usr/local/bin/lighthouse beacon --eth1 --http --datadir /mnt/ssd/beacon
User=beacon
Group=beacon
Restart=always
RestartSec=5s

[Install]
WantedBy=multi-user.target
Alias=beacon.service

This basically says: "Use the user with name and group beacon and run the beacon-chain as a service with eth1 and http flag to run a validator and save the data to my external SSD drive"
More details about beacon-chain parameters can be found here
Now you need to create a user called beacon (or any other name you like. The reason you want to create a different user is because it is recommended that a Service user shouldn't be able to login to the server via SSH.
To create a service user (I called it beacon) and type the following.
sudo useradd --no-create-home --shell /bin/false beacon
Next create a folder on the SSD drive for the Geth data to be stored. Type sudo mkdir -p /mnt/ssd/beacon
Give the new user access to write data on the SSD with sudo chown -R beacon:beacon /mnt/ssd/beacon
Finally reload and start the service by typing sudo systemctl daemon-reload followed by sudo systemctl start beacon

Create a Wallet to get your mnemonic and public key and start the validator

The manual of Lighthouse explains this very well. Check these last steps on their website.